1.A First angle and Third Angle Projection
2A. By using Sketch Analysis in CATIA Sketcher Module.
3a. You can find this tool in Drafting module we use this tool to break the component
partially to see material Hatch Pattern inside the Component.
4a. Break View is used to break the component at the certain position to reduce its length for the representation purpose.
5a. Right-click on the view and select regenerate properties.
6a. The thickness and Bend Allowance are the Sheet Metal Parameters.
7a. Select wall on edge command and select an edge on the base.
8a. By Using the Profile Command in Sketcher Module.
9a. yes right click on the model and edit properties.
10a. This view is used to Provide Detailing in Drafting. the region we have selected will be Zoomed out from the View.
11a. Run Out is used to provide tolerance to the Tapered sections here we have to consider the cross-sectional area of the view.
Total Run Out is used to provide Tolerance for the cylindrical component by taking the total axial length of the view.
12a. Tapered and Cylindrical Objects.
13a. Roundness we will consider only cross-section and cylindricity we have to consider total axial length.
14a. MMC-Maximum Material Condition we will represent this when we have to show to the manufacturer that at the features we need more material.
LMC- Least Material Condition it is used to mention the need for less material in the feature.
15a. ASME Y14.5 1994
16a. With Capital Letters in a closed Boundaries with rectangular in shape.
17a. By using Both Law of Buoyancy and The Third Law of newtons.
18a. Bulk Heads are the Structural Members used in the fuselage of Aeroplane which is used to separate the cabins.
19a. Compressors are meant to be increasing the pressure and turbines are meant to generate the power by expanding the gases from the combustors.
20a. We have to make sure that they are operating at their operational limits and to eliminate the surge and stall formations.